Purpose:
The paint is designed to add relief to the surface and for decorative finishing of walls and ceilings indoors (offices, halls, lobbies), including those with high humidity (kitchens, bathrooms, corridors, entrances). It allows for the creation of various textured patterns. After drying, it forms a durable structural coating resistant to light washing with non-abrasive detergents. It possesses high decorative properties, hiding power, and high adhesion to the painted surface.
Hides substrate irregularities.
Easy to apply.
Wear-resistant.
Vapor permeable.
Can be tinted in pastel and saturated colors.

Substrate type:
The paint can be applied to concrete, plastered, gypsum, and drywall surfaces, as well as to surfaces previously painted with water-dispersion paints. For interior work.

Application method:

• Brush
• Roller
• Spray gun

Consumption:
1−2 m²/kg

Gloss level:
Matte

Tinting:
Textured paint is produced as a base and can be tinted using computer (machine) methods into NCS, RAL, and other color catalogs. Manual tinting is possible using water-based tinting pastes.

Composition:
Polymer dispersion, pigments, fillers, functional additives, water.

Color:
White

Gloss level:
Matte

Wet abrasion resistance GOST 32300/ DIN EN 13300:
Class 2

Wash resistance:
Easy washing with non-abrasive detergents, no earlier than 2 weeks after application

Density:
1.6−1.67 kg/l

Consumption:
From 1−2 m²/kg*

Drying time "tack-free"**:
1−4 hours (depending on surface texture and layer thickness); full drying — 24 hours**

Texture adjustment time:
Up to 1 hour depending on layer thickness.

Air and substrates for application:
From +5 °C to +35 °C

*Material consumption depends on the quality of preparation and the absorption capacity of the substrate, the application method, the tool used, the qualification of the workers, and may differ from the specified values.
**At t (+20±2)°C and relative air humidity of no more than (65±5)%. When the temperature decreases or humidity increases, the drying time may increase. At air temperatures below +15°C or relative air humidity above 65%, apply the next layer no earlier than after 24 hours.

Scope of application

The paint can be applied to concrete, plastered, gypsum, and drywall surfaces, as well as to surfaces previously painted with water-dispersion paints.
For interior work.
For manual and mechanized application.
Used in all types of buildings and structures (A, B, C).

Textured paint is produced as a base and can be tinted using computer (machine) methods into NCS, RAL, and other color catalogs. Manual tinting is possible using water-based tinting pastes.
The organization performing the tinting is responsible for the tinting result.
Depending on the application conditions, as well as the texture of the surface being painted, the actual color shades may slightly differ from those presented in the color catalog.
Before application, it is necessary to perform a test application and check the dried coating for color compliance.
After adding tinting pastes, the product should be used as soon as possible to avoid changes in the properties of the tinted material during storage.
To avoid differences in shade, it is recommended to use product from the same production batch on one visual plane (the batch number is indicated on each package) or to pre-mix materials from different batches in a 1:1 ratio; the application technology must remain unchanged.

Substrate preparation

Substrate preparation should be carried out in accordance with SP 71.13330.2017.
Clean the substrate from dust and dirt. Remove unstable layers of old paint and whitewash from previously painted surfaces. Sand hard and firmly adhering glossy surfaces to a matte state, and remove the sanding dust. Level irregularities, depressions, cracks, and chips with Bergauf putty, then sand.
Surfaces previously covered with chalk or lime paints must be thoroughly cleaned until completely removed. Highly absorbent surfaces should be pre-primed with Praktik strengthening primer for painting to increase coating reliability and reduce paint consumption.

Work procedure

The surface to be painted must be dry and clean. The air and substrate temperature during application should be from +5°C to +35°C, relative air humidity below 80%.
Stir the paint thoroughly before use; the paint is ready for application.
To avoid differences in shade, use paint from the same batch. Before starting work, perform a test application on the surface to check for color consistency.
The maximum thickness of one layer is 2−3 mm; several layers can be applied depending on the desired decorative effect.
The material is applied with a roller, brush, sponge, stamp, spatula, or Venetian trowel, followed by texturing. It is important to note that the surface being painted must be covered from corner to corner across the entire area due to the difficulty of joining multiple layers after drying.
To achieve a "shuba" (textured coat) finish, the material is evenly distributed over the surface with a stainless steel trowel followed by structuring with a roller, or distributed directly with a roller; the same roller is then used to create the relief by moving it from top to bottom. The intensity of the relief depends on the number of passes during pattern formation. Use structural or paint rollers to achieve the desired relief.
Upon completion of work, wash hands and tools thoroughly with warm water.

Safety precautions
Work should be performed using personal protective equipment for hands, eyes, and respiratory tract. Use in well-ventilated areas. In case of contact with eyes, rinse immediately with water. In case of contact with skin, wash with soap and water.

Storage and transportation conditions

Store and transport in tightly closed containers at temperatures between +5°C and +35°C. Up to five freeze-thaw cycles are permitted for a total duration of no more than 2 weeks at temperatures no lower than -40°C.
The bucket containing the product should be protected from excessive heat and storage under direct sunlight should be avoided. Subject to storage conditions, the guaranteed shelf life in closed original packaging is 24 months from the date of manufacture.
During storage, product separation may occur, which is easily eliminated by stirring. Keep partially used product in a tightly closed container and use as soon as possible.

Disposal
Do not pour paint products into sewers, water bodies, or onto the soil. Dispose of dry empty containers in accordance with local legislation; transfer liquid residues to hazardous waste collection points.