Interior paints, decorative plasters and textured coatings for painting walls, ceilings, partitions and other indoor surfaces.
PAINTS AND COATINGS FOR INTERIOR WORK
A wide range of products to bring your ideas to life
Materials for rooms with normal and high humidity
Tinting in thousands of colors according to RAL, NCS and other color catalogs
Computer tinting
Easy to apply
Adds texture to the surface
Hides minor surface imperfections
PRAKTIK textured paint
Packaging:
Paint for decorative finishing and creating surface relief
Download specifications
The product is manufactured until July 2026.
Purpose:
Paint for decorative finishing and creating surface relief, for interior finishing work, including rooms with high humidity (kitchens, bathrooms, corridors, entrances). It possesses high decorative properties, hiding power, and strong adhesion to the painted surface. It has no sharp odor.
Substrate type:
Consumption:
1–1.5 m²/kg
Gloss level:
Matte
Tinting:
Paint tinting can be carried out in accordance with NCS, RAL and other tinting systems.
Purpose:
Paint for decorative finishing and creating surface relief, for interior finishing work, including rooms with high humidity (kitchens, bathrooms, corridors, entrances). It possesses high decorative properties, hiding power, and strong adhesion to the painted surface. It has no sharp odor.
Substrate type:
- Plastered, gypsum, and drywall surfaces, as well as surfaces previously painted with water-dispersion paints.
- Brush
- Roller
- Spray gun
Consumption:
1–1.5 m²/kg
Gloss level:
Matte
Tinting:
Paint tinting can be carried out in accordance with NCS, RAL and other tinting systems.
Composition:
Polyacrylic dispersion, pigments, fillers, target additives, water
Color:
White
Gloss level:
Matte
Wet scrub resistance GOST 32300/ DIN EN 13 300:
Class 2
Density:
About 1.67 kg/l
NVMS:
At least 75%
Thinner:
Water
Consumption:
From 1–1.5 m²/kg*
Drying time:
1–4 hours (depending on surface texture and layer thickness); full drying – 24 hours**
Texture adjustment time:
1 hour.
Substrate temperature during application:
From +5 °C to +35 °C
*Material consumption depends on the quality of substrate preparation, application method, tools used, qualification of the workers and may differ from the specified values.
**At t (+20±2) °C and relative air humidity not more than (65±5) %. When temperature decreases or humidity increases, drying time may increase.
Polyacrylic dispersion, pigments, fillers, target additives, water
Color:
White
Gloss level:
Matte
Wet scrub resistance GOST 32300/ DIN EN 13 300:
Class 2
Density:
About 1.67 kg/l
NVMS:
At least 75%
Thinner:
Water
Consumption:
From 1–1.5 m²/kg*
Drying time:
1–4 hours (depending on surface texture and layer thickness); full drying – 24 hours**
Texture adjustment time:
1 hour.
Substrate temperature during application:
From +5 °C to +35 °C
*Material consumption depends on the quality of substrate preparation, application method, tools used, qualification of the workers and may differ from the specified values.
**At t (+20±2) °C and relative air humidity not more than (65±5) %. When temperature decreases or humidity increases, drying time may increase.
Scope of application
The paint can be applied to plastered, gypsum, and drywall surfaces, as well as surfaces previously painted with water-dispersion paints.
Permitted for use in buildings and structures:
The paint can be applied to plastered, gypsum, and drywall surfaces, as well as surfaces previously painted with water-dispersion paints.
Permitted for use in buildings and structures:
- Type A — residential buildings and dormitories; buildings and premises of organizations for the upbringing and education, recreation and health improvement of children and youth; healthcare organizations; homes for the disabled and the elderly; sanatoriums; rest homes; indoor sports facilities; office premises with permanent human presence in administrative buildings at industrial enterprises and other Type B and C facilities;
- Type B — food industry, trade, and catering enterprises; hotels; non-food stores; communication enterprises; consumer service enterprises; cultural and entertainment facilities and other objects; administrative buildings;
- Type C — industrial enterprises, auxiliary and utility rooms and structures; warehouses; garages.
Paint tinting can be carried out in accordance with NCS, RAL and other tinting systems; it is permissible to add up to 5% of tinting pastes by weight of the paint.
To avoid differences in shade on the same surface, use products with the same batch number (see packaging) or pre-mix materials from different batches in a 1:1 ratio. The organization performing the tinting is responsible for the tinting result.
Depending on the application conditions, as well as the texture of the surface being painted, actual color shades may differ slightly from those presented in the color catalog. Before application, it is necessary to perform a test application and check the dried coating for color matching.
After adding tinting pastes, the product should be used as soon as possible to avoid changes in the properties of the tinted material during storage.
To avoid differences in shade on the same surface, use products with the same batch number (see packaging) or pre-mix materials from different batches in a 1:1 ratio. The organization performing the tinting is responsible for the tinting result.
Depending on the application conditions, as well as the texture of the surface being painted, actual color shades may differ slightly from those presented in the color catalog. Before application, it is necessary to perform a test application and check the dried coating for color matching.
After adding tinting pastes, the product should be used as soon as possible to avoid changes in the properties of the tinted material during storage.
Substrate preparation
Perform substrate preparation in accordance with SP 71.13330.2017. Clean the substrate of dust and dirt. Surfaces previously covered with chalk or lime paints must be thoroughly cleaned until completely removed.
Sand hard and firmly adhering glossy surfaces to a matte state, and remove sanding dust. Remove loose layers of old paint and whitewash from previously painted surfaces. Level irregularities, depressions, cracks, and chips with water-dispersion putty and sand them down.
Pre-prime intensely absorbent surfaces to increase coating reliability and reduce paint consumption. It is recommended to use primers and putties from the Bergauf line (depending on the type of substrate).
Work procedure
The surface to be painted must be dry and clean, the surface and air temperature must be at least +5 °C, and the relative air humidity below 80%. The room temperature during paint application should be from +5 °C to 35 °C, with a relative air humidity of (65±5)%.
Mix the paint thoroughly before use. The paint is ready for use. To avoid differences in shade, use paint from the same batch. Before starting work, perform a test application on the surface to check for color matching.
Application technology
The material is applied with a roller, brush, spatula, sponge, or special tools for decorative materials. The maximum layer thickness is 2–3 mm. After distributing the material evenly over the surface, start creating the relief with the same roller, moving it from top to bottom. The intensity of the relief depends on the number of passes during pattern formation.
To achieve the desired relief, use structural rollers or a notched trowel.
After completing the work, wash hands and tools thoroughly with warm water.
Perform substrate preparation in accordance with SP 71.13330.2017. Clean the substrate of dust and dirt. Surfaces previously covered with chalk or lime paints must be thoroughly cleaned until completely removed.
Sand hard and firmly adhering glossy surfaces to a matte state, and remove sanding dust. Remove loose layers of old paint and whitewash from previously painted surfaces. Level irregularities, depressions, cracks, and chips with water-dispersion putty and sand them down.
Pre-prime intensely absorbent surfaces to increase coating reliability and reduce paint consumption. It is recommended to use primers and putties from the Bergauf line (depending on the type of substrate).
Work procedure
The surface to be painted must be dry and clean, the surface and air temperature must be at least +5 °C, and the relative air humidity below 80%. The room temperature during paint application should be from +5 °C to 35 °C, with a relative air humidity of (65±5)%.
Mix the paint thoroughly before use. The paint is ready for use. To avoid differences in shade, use paint from the same batch. Before starting work, perform a test application on the surface to check for color matching.
Application technology
The material is applied with a roller, brush, spatula, sponge, or special tools for decorative materials. The maximum layer thickness is 2–3 mm. After distributing the material evenly over the surface, start creating the relief with the same roller, moving it from top to bottom. The intensity of the relief depends on the number of passes during pattern formation.
To achieve the desired relief, use structural rollers or a notched trowel.
After completing the work, wash hands and tools thoroughly with warm water.
Storage and transportation conditions
Store and transport in tightly closed containers at a temperature of at least +5°C and no more than +35°C. Five-fold freezing is allowed for a total duration of no more than 2 weeks at a temperature not lower than –40°C.
The product bucket should be protected from excessive heat and storage under direct sunlight should be avoided. Subject to storage conditions, the guaranteed shelf life in closed original packaging is 24 months from the date of manufacture.
During storage, product separation may occur, which is easily eliminated by stirring. Keep partially used product in a tightly closed container and use it as soon as possible.
Safety
The product is fire and explosion safe; it contains no flammable components.
Store and transport in tightly closed containers at a temperature of at least +5°C and no more than +35°C. Five-fold freezing is allowed for a total duration of no more than 2 weeks at a temperature not lower than –40°C.
The product bucket should be protected from excessive heat and storage under direct sunlight should be avoided. Subject to storage conditions, the guaranteed shelf life in closed original packaging is 24 months from the date of manufacture.
During storage, product separation may occur, which is easily eliminated by stirring. Keep partially used product in a tightly closed container and use it as soon as possible.
Safety
The product is fire and explosion safe; it contains no flammable components.