Purpose:
The primer is intended for dust removal, strengthening, and preparing the substrate for subsequent finishing (puttying, painting, wallpapering).

Substrate type:
Used for treating concrete, plastered, gypsum, drywall surfaces, chipboard, and fiberboard materials.
For interior and exterior work.

Application method:

• Brush
• Roller
• Spray gun

Consumption:
6−8 m²/l

Palette:
Colorless

Composition:
Polymer water dispersion, functional additives, water, biocide complex.

Color:
Colorless

Density:
1.0−1.05 kg/l

NVMC:
Not less than 4%

Recommended number of layers:
1−2

Consumption*:
6−8 m²/l

Drying time**:
2 hours

Air and substrate temperature during application:
from +5 °C to +35 °C

*Material consumption depends on the quality of substrate preparation, application method, tools used, and the skill of the workers, and may differ from the specified values.
** At t (+20±2)°C and relative air humidity not exceeding (65±5)%. When the temperature decreases or humidity increases, the drying time may increase. At air temperatures below +15℃ or relative air humidity above 65%, apply the next layer no earlier than after 24 hours.

Used for treating concrete, plastered, gypsum, and drywall surfaces, as well as particleboard and fiberboard materials.
For interior and exterior use.
The primer can be used in rooms with normal and high humidity.
Applicable in all types of buildings and structures (A, B, C).

Colorless

Substrate preparation
Substrate preparation should be carried out in accordance with SP 71.13330.2017.
The surface must be strong, clean, and dry. Before priming, it is necessary to remove peeling elements, chalk and lime whitewash, dust, and other contaminants from the surface.
If necessary, level surface irregularities with Bergauf putty, then sand the dried surface.

Application procedure
The surface to be treated must be dry and clean, air and substrate temperature during application from +5°C to +35°C, relative air humidity below 80%.
Mix until smooth before use, do not dilute.
Apply to the prepared dry clean surface with a roller, brush, or sprayer (nozzle 0.011−0.015″, pressure no more than 150−170 bar).
Highly absorbent surfaces are recommended to be primed twice.
Painting of the primed coating is recommended no earlier than after 2−3 hours, provided the temperature regime is from +5°C and relative air humidity is no more than 80%.

Safety precautions
Work should be performed using personal protective equipment for hands, eyes, and respiratory tract. Use in well-ventilated areas. In case of contact with eyes, rinse immediately with water. In case of contact with skin, wash with soap and water.

Store and transport in tightly closed containers at temperatures from +5°C to +35°C. Five-fold freezing is allowed for a total duration of no more than 2 weeks at a temperature not lower than -40°C. Protect the product bucket from excessive heat and avoid storage under direct sunlight. Subject to storage conditions, the guaranteed shelf life in closed original packaging is 24 months from the date of manufacture. Product separation may occur during storage, which is easily eliminated by stirring. Keep partially used product in a tightly closed container and use as soon as possible.
The product is fire and explosion safe, contains no flammable components.

Disposal
Do not pour paint products into sewers, water bodies, or onto soil. Dispose of dry empty containers in accordance with local legislation; transfer liquid residues to hazardous waste collection points.