Primers for preparing the substrate for subsequent finishing.
Primers
Improve adhesion
Ensure smooth application of
finish coatings
finish coatings
Reduce consumption of
finishing materials
finishing materials
Protects against mold and mildew
Reduces paint consumption by up to 10%
Strengthens the surface
Increases adhesion
PRAKTIK Primer
Packaging:
Strengthening acrylic primer for painting
Download specifications
The product is manufactured until July 2026.
Purpose:
The primer is designed for dust removal, strengthening, and preparing the substrate for subsequent finishing (plastering, painting, wallpapering).
Substrate type:
Application method:
Consumption:
6−8 m²/l
Palette:
Colorless
Purpose:
The primer is designed for dust removal, strengthening, and preparing the substrate for subsequent finishing (plastering, painting, wallpapering).
Substrate type:
- For treating concrete, plastered, gypsum, drywall surfaces, chipboard, and fiberboard materials.
- The primer can be used in rooms with normal and high humidity.
Application method:
- Brush
- Roller
- Spray gun
Consumption:
6−8 m²/l
Palette:
Colorless
Composition:
Polymer water dispersion, functional additives, water, biocide.
Color:
Colorless
Density:
approx. 1.0 kg/l
NVMC:
At least 4%
Recommended number of coats:
1−2
Consumption*:
6−8 m²/l
Drying time**:
2 hours
Substrate temperature during application:
from +5 °C to +35 °C
Operating temperature:
from -50 °C to +70°C
Transportation temperature:
from +5 °C to +35 °C
Shelf life:
24 months
*Material consumption depends on the quality of substrate preparation, application method, tools used, and the skill of the workers, and may differ from the specified values.
** At t +20±2 °C and relative air humidity not more than 65±5%. When the temperature decreases or humidity increases, the drying time may increase. At air temperatures below +15°C or relative air humidity above 65%, apply the next coat no earlier than after 24 hours.
Polymer water dispersion, functional additives, water, biocide.
Color:
Colorless
Density:
approx. 1.0 kg/l
NVMC:
At least 4%
Recommended number of coats:
1−2
Consumption*:
6−8 m²/l
Drying time**:
2 hours
Substrate temperature during application:
from +5 °C to +35 °C
Operating temperature:
from -50 °C to +70°C
Transportation temperature:
from +5 °C to +35 °C
Shelf life:
24 months
*Material consumption depends on the quality of substrate preparation, application method, tools used, and the skill of the workers, and may differ from the specified values.
** At t +20±2 °C and relative air humidity not more than 65±5%. When the temperature decreases or humidity increases, the drying time may increase. At air temperatures below +15°C or relative air humidity above 65%, apply the next coat no earlier than after 24 hours.
Used for treating concrete, plastered, gypsum, drywall surfaces, chipboard, and fiberboard materials.
The primer can be used in rooms with normal and high humidity and for outdoor work.
The primer can be used in rooms with normal and high humidity and for outdoor work.
Colorless
Substrate Preparation
Substrate preparation should be carried out in accordance with SP 71.13330.2017. The surface must be strong, clean, and dry. Before priming, it is necessary to remove peeling elements, chalk and lime whitewash, dust, and other contaminants from the surface. If necessary, fill surface irregularities with putty, then sand the dried surface.
Application Procedure
The surface to be treated must be dry and clean, the substrate temperature for work must be from +5°C, the room temperature during paint application from +5°C to +35°C, and relative air humidity below 80%.
Stir until homogeneous before use, do not dilute.
Apply to a prepared dry clean surface with a roller, brush, or sprayer (nozzle 0.28−0.38 mm, pressure no more than 150−170 bar).
Highly absorbent surfaces are recommended to be primed twice.
Painting of the primed coating is recommended no earlier than after 2−3 hours, provided the temperature regime of +5°C and relative air humidity of no more than 80% are maintained.
Substrate preparation should be carried out in accordance with SP 71.13330.2017. The surface must be strong, clean, and dry. Before priming, it is necessary to remove peeling elements, chalk and lime whitewash, dust, and other contaminants from the surface. If necessary, fill surface irregularities with putty, then sand the dried surface.
Application Procedure
The surface to be treated must be dry and clean, the substrate temperature for work must be from +5°C, the room temperature during paint application from +5°C to +35°C, and relative air humidity below 80%.
Stir until homogeneous before use, do not dilute.
Apply to a prepared dry clean surface with a roller, brush, or sprayer (nozzle 0.28−0.38 mm, pressure no more than 150−170 bar).
Highly absorbent surfaces are recommended to be primed twice.
Painting of the primed coating is recommended no earlier than after 2−3 hours, provided the temperature regime of +5°C and relative air humidity of no more than 80% are maintained.
Storage and Transportation Conditions
Store and transport in tightly closed containers at a temperature of no less than +5° and no more than +35°C. Five-fold freezing is allowed for a total duration of no more than 2 weeks at a temperature no lower than -40°C.
Protect the product container from excessive heating and avoid storage under direct sunlight. Subject to storage conditions, the guaranteed shelf life in closed factory packaging is 24 months from the date of manufacture.
Safety
The product is fire- and explosion-proof; it does not contain flammable components.
Store and transport in tightly closed containers at a temperature of no less than +5° and no more than +35°C. Five-fold freezing is allowed for a total duration of no more than 2 weeks at a temperature no lower than -40°C.
Protect the product container from excessive heating and avoid storage under direct sunlight. Subject to storage conditions, the guaranteed shelf life in closed factory packaging is 24 months from the date of manufacture.
Safety
The product is fire- and explosion-proof; it does not contain flammable components.