Purpose:
Bioprotection – a product for protection against rot, mold, blue stain, and wood-boring insects under conditions of direct exposure to precipitation, soil moisture, hygroscopic and condensation moisture, and contact with the ground, used both independently and as a bioprotective primer for paints and coatings.

Substrate type:

• New and previously antiseptic-treated wooden battens and frames, joists, trusses, walls and their cladding, floorings, fences, enclosures, and other sawn, planed, or chopped structural elements for residential, public, industrial, and agricultural purposes.

Protection against:

• Rot
• Mold
• Blue stain
• Wood-boring insects

Properties:

• Hard to wash out – chemically bonds with the wood
• Forms 3 levels of bio-protection in the wood
• Penetrates wood well, does not increase its hygroscopicity
• Does not impair the strength, glueability, or paintability of the wood
• Has low corrosive aggressiveness towards ferrous metals
• Preserves the texture, does not prevent the wood from breathing
• Stops bio-deterioration that has already begun

Application method:

• Manual (brush, roller with synthetic bristles)
• Machine (spray gun)*

*Machine application is possible on a surface already treated with the same composition. Depends on the type of wood and the quality of its surface.

Total consumption when applied by brush, roller, sprayer:
At least 250-300 g/sq.m*

Consumption during soaking or autoclaving:
60-80 kg/cu.m*

Palette:
Shades of yellow

Composition:
Hard-to-wash antiseptic, targeted additives, water

Color:
Shades of yellow

Drying time between layers:
20−40 minutes

Resistance to leaching after:
2−3 days**

Bioprotection period:
30−35 years in moderate conditions***

Total consumption when applied by brush, roller, sprayer:
At least 250−300 g/sq.m*

Consumption during soaking or autoclaving:
60−80 kg/cu.m*

*Consumption depends on operating conditions and the required service life of the treated wood.
**When dried under normal conditions.
***Mathematically estimated based on the leaching test protocol according to GOST 50241–2021. All stated quality indicators and recommendations are correct for an ambient temperature of +20°C and a relative air humidity of 60%. In other conditions, the technical characteristics of the material may differ from those specified.

Purpose and scope of application
Bioprotection – a means of protection against rot, mold, blue stain, and wood-boring insects under conditions of direct exposure to atmospheric precipitation, soil moisture, hygroscopic and condensation moisture, and contact with the ground, both independently and as a bioprotective primer under paintwork materials. Hard-to-wash antiseptic – chemically bonds with the wood. Penetrates well into the wood without increasing its hygroscopicity. Does not impair the strength, glueability, or paintability of the wood. Has low corrosive aggressiveness towards ferrous metals.
For application on new and previously antiseptic-treated wooden battens and frames, joists, trusses, walls and their cladding, decking, fences, enclosures, and other sawn, planed, or logged structural elements for residential, public, industrial, and agricultural purposes.

Protection against:

• Rot
• Mold
• Blue stain
• Wood-boring insects

Available in a fixed color palette:
Shades of yellow

Storage and transportation conditions
Store and transport in the manufacturer's hermetically sealed container at temperatures from +5°C to +35°C, separately from food products. Properties are preserved after thawing and stirring. Shelf life — 36 months.

Manufacturer's liability
The manufacturer is not liable for non-compliance with the technology of working with the material, for its use for purposes and under conditions not provided for by these instructions, as well as in the case of introducing foreign components and substances into the product composition.