Interior paints, decorative plasters and textured coatings for painting walls, ceilings, partitions and other indoor surfaces.
PAINTS AND COATINGS FOR INTERIOR WORK
A wide range of products to bring your ideas to life
Materials for rooms with normal and high humidity
Tinting in thousands of colors according to RAL, NCS and other color catalogs
Computer tinting
Eco-friendly, hypoallergenic
Easy and even application
Snow-white matte
Odorless, water-based
PRAKTIK interior paint
Packaging:
Water-dispersion polyacrylic paint for interior work
Download specifications
The product is manufactured until July 2026.
Purpose:
Paint for painting walls and ceilings indoors with normal humidity. The paint is ready to use.
Substrate type:
4−7 m²/kg
Gloss level:
Matte
Tinting:
The paint can be tinted in accordance with NCS, RAL, and other tinting systems.
Purpose:
Paint for painting walls and ceilings indoors with normal humidity. The paint is ready to use.
Substrate type:
- Concrete, brick, fiberboard and particleboard, gypsum plasterboard, plastered, previously painted surfaces (non-glossy), fiberglass and smooth painter's non-woven fabric.
- Brush
- Roller
- Spray gun
4−7 m²/kg
Gloss level:
Matte
Tinting:
The paint can be tinted in accordance with NCS, RAL, and other tinting systems.
Composition:
Polyacrylic dispersion (latex), pigments, fillers, target additives, water.
Color:
Base A — white
Gloss level:
Matte
Consumption per 1 coat on a smooth non-absorbent surface:
5−7 m²/kg
Consumption per 1 coat on an uneven absorbent surface:
4−6 m²/kg
Density:
approx. 1.5 kg/l
NVSC:
55%
Drying time to degree 3**:
0.5 hours
Next coat can be applied after**:
1 hour**
Wash resistance:
Cleaning with a dry non-abrasive sponge or a soft-bristled brush
Substrate temperature during application:
+5 °C to 35 °C
* Material consumption depends on the quality of substrate preparation, application method, tools used, qualification of the workers and may differ from the specified values.
** at t +20±2 °C and relative air humidity not more than 65±5%.
When the temperature decreases or humidity increases, the drying time may increase. At air temperatures below +15°C or
relative air humidity above 65%, apply the next coat no earlier than after 24 hours.
Polyacrylic dispersion (latex), pigments, fillers, target additives, water.
Color:
Base A — white
Gloss level:
Matte
Consumption per 1 coat on a smooth non-absorbent surface:
5−7 m²/kg
Consumption per 1 coat on an uneven absorbent surface:
4−6 m²/kg
Density:
approx. 1.5 kg/l
NVSC:
55%
Drying time to degree 3**:
0.5 hours
Next coat can be applied after**:
1 hour**
Wash resistance:
Cleaning with a dry non-abrasive sponge or a soft-bristled brush
Substrate temperature during application:
+5 °C to 35 °C
* Material consumption depends on the quality of substrate preparation, application method, tools used, qualification of the workers and may differ from the specified values.
** at t +20±2 °C and relative air humidity not more than 65±5%.
When the temperature decreases or humidity increases, the drying time may increase. At air temperatures below +15°C or
relative air humidity above 65%, apply the next coat no earlier than after 24 hours.
Purpose and properties
Designed for painting walls and ceilings indoors in rooms with normal humidity. The paint is ready to use. Easy to apply, dries quickly, has no sharp odor. After drying, it forms a smooth matte surface.
Possesses good decorative properties, hiding power and strong adhesion to the painted surface. Withstands cleaning with a dry soft brush or sponge, no earlier than 4 weeks after application. Manual tinting is possible using water-based tinting pastes.
Scope of application
The paint can be applied to concrete, brick, fiberboard and particleboard, gypsum plasterboard, plastered, previously painted surfaces (non-glossy), fiberglass, and smooth painter's non-woven wallpaper. For manual and mechanized application.
Approved for use in buildings and structures:
Designed for painting walls and ceilings indoors in rooms with normal humidity. The paint is ready to use. Easy to apply, dries quickly, has no sharp odor. After drying, it forms a smooth matte surface.
Possesses good decorative properties, hiding power and strong adhesion to the painted surface. Withstands cleaning with a dry soft brush or sponge, no earlier than 4 weeks after application. Manual tinting is possible using water-based tinting pastes.
Scope of application
The paint can be applied to concrete, brick, fiberboard and particleboard, gypsum plasterboard, plastered, previously painted surfaces (non-glossy), fiberglass, and smooth painter's non-woven wallpaper. For manual and mechanized application.
Approved for use in buildings and structures:
- Type A — residential buildings and dormitories; buildings and premises of organizations for the upbringing and education, recreation and health improvement of children and youth; healthcare organizations; homes for the disabled and the elderly; sanatoriums; rest homes; indoor sports facilities; office premises with permanent presence of people in administrative buildings at industrial enterprises and other facilities of types B, V;
- type B — food industry, trade, and catering enterprises; hotels; non-food stores; communication enterprises; consumer service enterprises; cultural and entertainment facilities and other objects; administrative buildings;
- type C — industrial enterprises, auxiliary and utility rooms and structures; warehouses; garages.
The paint is produced as Base A and can be tinted using a computer (machine) method. Base A is intended for tinting into light and pastel shades, and can also be used as a white paint.
Tinting of the paint can be carried out in accordance with NCS, RAL and other tinting systems; it is permissible to add up to 5% of tinting pastes by weight of the paint.
Manual tinting is possible using water-based tinting pastes. To avoid differences in shade on the same surface, a product with the same batch number should be used (see on the packaging) or materials from different batches should be pre-mixed in a 1:1 ratio. The organization performing the tinting is responsible for the tinting result.
Depending on the application conditions, as well as the texture of the surface being painted, actual color shades may differ slightly from those presented in the color catalog. Before application, it is necessary to perform a test application and check the dried coating for color compliance.
After adding tinting pastes, the product should be used as soon as possible to avoid changes in the properties of the tinted material during storage.
Tinting of the paint can be carried out in accordance with NCS, RAL and other tinting systems; it is permissible to add up to 5% of tinting pastes by weight of the paint.
Manual tinting is possible using water-based tinting pastes. To avoid differences in shade on the same surface, a product with the same batch number should be used (see on the packaging) or materials from different batches should be pre-mixed in a 1:1 ratio. The organization performing the tinting is responsible for the tinting result.
Depending on the application conditions, as well as the texture of the surface being painted, actual color shades may differ slightly from those presented in the color catalog. Before application, it is necessary to perform a test application and check the dried coating for color compliance.
After adding tinting pastes, the product should be used as soon as possible to avoid changes in the properties of the tinted material during storage.
Substrate preparation
Substrate preparation should be performed in accordance with SP 71.13330.2017. Clean the substrate from dust and dirt. Remove unstable layers of old paint and whitewash from previously painted surfaces. Sand hard and firmly adhering glossy surfaces to a matte state, and remove the sanding dust.
Level irregularities, depressions, cracks, and chips with Bergauf UNI PASTA water-dispersion putty and sand. Surfaces previously covered with chalk or lime paints must be thoroughly cleaned until completely removed.
Intensively absorbing surfaces should be pre-primed to increase the reliability of the coating and reduce paint consumption. It is recommended to use primers from the Praktik line (depending on the type of substrate).
Substrate preparation should be performed in accordance with SP 71.13330.2017. Clean the substrate from dust and dirt. Remove unstable layers of old paint and whitewash from previously painted surfaces. Sand hard and firmly adhering glossy surfaces to a matte state, and remove the sanding dust.
Level irregularities, depressions, cracks, and chips with Bergauf UNI PASTA water-dispersion putty and sand. Surfaces previously covered with chalk or lime paints must be thoroughly cleaned until completely removed.
Intensively absorbing surfaces should be pre-primed to increase the reliability of the coating and reduce paint consumption. It is recommended to use primers from the Praktik line (depending on the type of substrate).
Storage and Transportation Conditions
Store and transport in tightly closed containers at temperatures not less than +5° and not more than +35°C. Five-fold freezing is allowed for a total duration of no more than 2 weeks at temperatures not lower than -40°C.
Protect the bucket with the product from excessive heating and avoid storage under direct sunlight. Subject to storage conditions, the guaranteed shelf life in closed factory packaging is 24 months from the date of manufacture.
During storage, product separation may occur, which is easily eliminated by stirring. Keep partially used product in a tightly closed container and use as soon as possible.
Safety
The product is fire- and explosion-safe, and does not contain flammable components.
Store and transport in tightly closed containers at temperatures not less than +5° and not more than +35°C. Five-fold freezing is allowed for a total duration of no more than 2 weeks at temperatures not lower than -40°C.
Protect the bucket with the product from excessive heating and avoid storage under direct sunlight. Subject to storage conditions, the guaranteed shelf life in closed factory packaging is 24 months from the date of manufacture.
During storage, product separation may occur, which is easily eliminated by stirring. Keep partially used product in a tightly closed container and use as soon as possible.
Safety
The product is fire- and explosion-safe, and does not contain flammable components.