Purpose:
Primer for interior and exterior work. Designed for dust removal and substrate preparation for subsequent finishing (puttying, painting, wallpapering, floor covering installation).

Use before applying:

• Putty
• Paint
• Wallpaper
• Floor coverings

Substrate type:

• Concrete
• Plaster, putty
• Gypsum board
• Fiberboard, chipboard

Application method:

• Brush
• Roller
• Spray gun

Consumption:
8-12 m²/l

Palette:
colorless

Composition:
Polymer water dispersion, functional additives, water, biocide.

Color:
Colorless

Appearance in container:
Opaque white liquid

Film color:
Colorless

Non-volatile matter content:
Not less than 5%

Consumption*:
8−10 m²/l

Density:
approx. 1.0 kg/l

Recommended number of layers:
1−2

Drying time**:
2 hours

Substrate temperature during application:
from +5 °C to +35 °C

Operating temperature:
from -50 °C to +70 °C

Transportation temperature:
from +5 °C to +35 °C

Shelf life:
24 months

* Material consumption depends on the quality of substrate preparation and the application method.
** at t (+20±2) °C and relative air humidity of no more than (65±5) %. If the temperature decreases or humidity increases, the drying time may increase. At air temperatures below +15°C or relative air humidity above 65%, apply the next layer no earlier than after 24 hours.

Used for treating concrete, plastered, gypsum, drywall surfaces, chipboard, and fiberboard materials. The primer can be used in rooms with normal and high humidity. High-quality primer for interior and exterior work. Designed for dust removal and substrate preparation for subsequent finishing (puttying, painting, wallpapering, floor covering installation). Strengthens the surface, reduces and levels the absorption capacity of the substrate. Increases adhesion and reduces paint consumption by up to 15%. Protects against mold and mildew.

Available in a fixed color palette: colorless

Surface preparation:

Prepare the substrate in accordance with SP 71.13330.2017.
The surface must be strong, clean, and dry. Before priming, it is necessary to
remove peeling elements, chalk and lime whitewash,
dust, and other contaminants from the surface. If necessary, fill surface irregularities with putty, then sand the dried surface.

Application procedure:

1. The surface to be treated must be dry and clean, the substrate temperature for the work must be from +5°C, the room temperature during paint application from +5°C to +35°C, and relative air humidity below 80%.
2. Mix until smooth before use; do not dilute.
3. Apply to the prepared dry, clean surface with a roller, brush, or sprayer (nozzle 0.28 mm, pressure no more than 150−170 bar).
4. Highly absorbent surfaces are recommended to be primed twice.
5. Painting of the primed coating is recommended no earlier than 2−3 hours later, provided the temperature regime of +5°C and relative air humidity of no more than 80% are maintained.
Upon completion of work, wash hands and tools thoroughly with warm water.

Store and transport in tightly closed containers at a temperature of at least +5°C and no more than +35°C. Five-fold freezing is allowed for a total duration of no more than 2 weeks at a temperature not lower than -40°C. Protect the product container from excessive heating and avoid storage under direct sunlight. Subject to these conditions, the guaranteed shelf life in closed factory packaging is 24 months from the date of manufacture.

The product is fire and explosion-proof and does not contain flammable components.