Silicone, silicate and complex adhesion Bergauf paints for facades, plinths and any other exterior surfaces.
Paints and coatings for exterior work
Paints are tested for compatibility within the system
Provide an excellent combination of durability and aesthetics
Reliably protect against moisture, sun and sudden temperature changes
For interior and exterior use
Wear resistance
Deep matte snow-white
High hiding power
MINERAL TECHNO water-dispersion acrylic paint for facade work
Packaging:
Facade water-dispersion acrylic paint
Download specifications
Purpose:
Acrylic facade paint for painting mineral facades and plinths, as well as for rooms with normal and high humidity
Substrate type:
Application method:
Consumption:
4−8 m²/l
Gloss level:
Deep matte
Tinting:
The paint is available in two bases: A (white) and C (transparent). It can be tinted manually or by computer (machine) in RAL, NCS, and other color catalogs.
Acrylic facade paint for painting mineral facades and plinths, as well as for rooms with normal and high humidity
Substrate type:
- Concrete, reinforced concrete
- Cement plasters
- Cement-lime and lime plasters
- Mineral and acrylic decorative plasters
- Non-glossy construction ceramics
- Firmly adhering coatings previously painted with water-dispersion or perchlorovinyl paints
Application method:
- Brush
- Roller
- Spray gun
Consumption:
4−8 m²/l
Gloss level:
Deep matte
Tinting:
The paint is available in two bases: A (white) and C (transparent). It can be tinted manually or by computer (machine) in RAL, NCS, and other color catalogs.
Composition:
Styrene-acrylic dispersion, mineral fillers, pigments, functional additives, water
Color:
Base A - white, Base C - transparent
Gloss level:
Deep matte
Consumption per 1 coat on non-absorbent surfaces:
6 - 8 m²/l*
Consumption per 1 coat on absorbent surfaces:
4 - 6 m²/l*
Drying time:
1 hour**
Next coat can be applied after:
12 hours**
Substrate temperature during application:
+5 °C to 35 °C
Resistance to atmospheric precipitation:
24 hours
*Consumption is affected by the roughness and porosity of the surface being painted, as well as the method and conditions of application.
**At t (+20 ± 2)℃ and relative air humidity not more than (65±5)%. Drying time may increase at air temperatures below +15 ℃ and relative air humidity above 65% - apply the next coat no earlier than after 24 hours.
Styrene-acrylic dispersion, mineral fillers, pigments, functional additives, water
Color:
Base A - white, Base C - transparent
Gloss level:
Deep matte
Consumption per 1 coat on non-absorbent surfaces:
6 - 8 m²/l*
Consumption per 1 coat on absorbent surfaces:
4 - 6 m²/l*
Drying time:
1 hour**
Next coat can be applied after:
12 hours**
Substrate temperature during application:
+5 °C to 35 °C
Resistance to atmospheric precipitation:
24 hours
*Consumption is affected by the roughness and porosity of the surface being painted, as well as the method and conditions of application.
**At t (+20 ± 2)℃ and relative air humidity not more than (65±5)%. Drying time may increase at air temperatures below +15 ℃ and relative air humidity above 65% - apply the next coat no earlier than after 24 hours.
Facade acrylic paint is intended for painting mineral facades and plinths, as well as for rooms with normal and high humidity. On building plinths, capillary moisture suction from the substrate side must be excluded.
Forms a coating resistant to moisture, precipitation, UV radiation, alkali solutions, and the industrial environment of enterprises and cities. Suitable for manual and machine application.
Forms a coating resistant to moisture, precipitation, UV radiation, alkali solutions, and the industrial environment of enterprises and cities. Suitable for manual and machine application.
The paint is available in 2 bases — A and C. Tinting is possible using water-based tinting pastes. Base A is intended for tinting in light and pastel shades, and can also be used as white paint. Base C is used only in tinted form and is intended for tinting in saturated shades.
When painting in bright colors using Base C, it is recommended to first apply a layer of Base A paint tinted in a similar shade. Tinting of the paint can be carried out in accordance with NCS, RAL and other tinting systems.
To avoid differences in shade on the same surface, a product with the same batch number (see on the packaging) should be used or materials from different batches should be pre-mixed in a 1:1 ratio. The organization performing the tinting is responsible for the tinting result.
Depending on the application conditions, as well as the texture of the surface being painted, the actual color shades may differ slightly from those presented in the color catalog. Before use, it is necessary to perform a test application and check the dried coating for color compliance.
When painting in bright colors using Base C, it is recommended to first apply a layer of Base A paint tinted in a similar shade. Tinting of the paint can be carried out in accordance with NCS, RAL and other tinting systems.
To avoid differences in shade on the same surface, a product with the same batch number (see on the packaging) should be used or materials from different batches should be pre-mixed in a 1:1 ratio. The organization performing the tinting is responsible for the tinting result.
Depending on the application conditions, as well as the texture of the surface being painted, the actual color shades may differ slightly from those presented in the color catalog. Before use, it is necessary to perform a test application and check the dried coating for color compliance.
Surface preparation
- Clean the surface from dust, dirt, efflorescence, and oil stains. Remove poorly adhering paint and plaster with a sandblasting or hydro-sandblasting machine or a steel brush. Heavily chalking and unstable surfaces must be cleared to a solid base mechanically or by washing with water under pressure.
- Level surface defects with an appropriate repair mortar. In case of surface damage by fungus or mold, treat with a sanitizing agent, following the relevant instructions.
- New concrete surfaces can be painted after one heating season, new plastered surfaces after 1–2 months, and new fiber cement boards after 6 months. Glossy concrete surfaces (cement laitance) should be treated with a sandblaster or a steel brush to create a profile suitable for painting.
- Open any cracks in the reinforced concrete structure by scraping or using a grinding machine with a disc and flange. Clean exposed metal from rust and protect it with anti-corrosion paint.
- Before application, treat the surface with an appropriate primer from the Bergauf line — Bergauf Tiefgrunt, Bergauf Techno Primer, or Bergauf Aqua Grunt (diluted, choose the concentration level depending on the type of substrate).
- The surface must be dry, clean, and primed before painting. Apply the paint at a temperature not lower than +5°C and relative air humidity not exceeding 80%. It is forbidden to carry out work in hot weather, in strong winds, under direct sunlight, or during rain.
- Mix the paint thoroughly before use. Dilution with water is allowed in an amount of no more than 5% of the material weight. Apply evenly in 2 layers to the prepared surface using a brush, roller, or paint sprayer.
- To avoid differences in shade, use paint from the same batch. It is recommended not to take breaks when painting a continuous surface; work using the "wet-on-wet" method at "overlap" areas. Finish work at architectural boundaries (at the corners of the building, under drainpipes, etc.).
Storage and transportation conditions
Store and transport in tightly closed containers at temperatures between +5° and +40°C. Protect the bucket from excessive heating and avoid storage under direct sunlight. Subject to storage conditions, the guaranteed shelf life in closed original packaging is 24 months from the date of manufacture.
Safety
The product is fire- and explosion-safe and does not contain flammable components.
Store and transport in tightly closed containers at temperatures between +5° and +40°C. Protect the bucket from excessive heating and avoid storage under direct sunlight. Subject to storage conditions, the guaranteed shelf life in closed original packaging is 24 months from the date of manufacture.
Safety
The product is fire- and explosion-safe and does not contain flammable components.